Machine Use Miter/Slide Miter Saw,Table Saw,Circular Saw
Material: Cemented Carbide
Blade Diameter:10" (255mm)
Kerf .118" (3.0mm)
Combination Tooth Design for Versatility and Accuracy:This ultimate
combination blade of 120 teeth are arranged in groups of five, each
of which includes one flat-top raker tooth for fast, accurate
ripping. Each flat tooth is followed by four alternating-top-bevel
(ATB) teeth that are particularly well suited to crosscutting, and
large gullets between the teeth ensure effective chip clearance.
TCT CIRCULAR SAW BLADES
Security and tool' s employment informations
HANDLING USE: Use protection gloves
BEFORE USE: Control the sense of rotation indicated on the tool.
The accidental ignition of the machine during the replacement of
the tool must be excluded.
The surfaces of the tool must be cleaned to eliminate dirty, grease
oil and wate Attention must be paid during the assembly of the
tool: the blocking must act only on the body of the tool. The tool
must be firmly blocked Sothat to avoid the loosening during the
use. The use of removable rings or bushes to adjust the dimensions
of the bore of the circular saw blades is not permitted. The use of
fixed rings, for example by pressure or with adhesive blocking, on
the saw blades must be per-mitted only if made in accordance with
the specifications of the pro-ducer.
For your security the r.p. m. max marked on the tool doesn't have
to be exceeded
CLEANING AND REPAIRING: Use only products suitable for the
The repairing, where it is possible, must be done only by qualified
The tool with cracked body must be discarded.
(The repairing is not permitted The saw must be put out of use when
the teeth's dimensions are reduced at less then 1 mm(see drawing)
Use always original packing for maintenance and transportation.